background image

Accessing the web user interface:

Account Settings: 

 

Click on

 

Account

->

Register

->

Account X 

(X=1,2,3...15,16)

Parameters of the account:

Network Settings:

Account Settings:

Configuring via phone user interface

Configuring via web user interface

Register status icons on the LCD screen:

1. Press the 

OK

 key when the phone is idle to obtain the IP address of the phone. 

You can configure the network settings in the following ways:

It shows the register status of the current account.
You can select Enabled/Disabled to enable/disable the account.
It is shown on the LCD screen to identify the account.
It is shown as caller ID when placing a call.
It is provided by ITSP for registration (required).
It is an authenticated ID for authentication provided by ITSP (required).
It is provided by ITSP for registration (required).
It is provided by ITSP for registration (required).

DHCP:

 

By default, the phone attempts to contact a DHCP server in your network to obtain its valid network 

            settings, e.g., IP address, subnet mask, gateway address and DNS address.

        

Static IP Address: 

If your phone cannot contact a DHCP server for any reason, you need to configure the IP 

                              address, subnet mask, gateway address, primary DNS address and secondary DNS address 

                              for the phone manually.   

Press the

 

Menu

 

soft key when the phone is idle, select

 

Advanced 

(default password: admin)->

Network

->

WAN Port

/

VLAN

/

Web Server

/

802.1x

/

VPN

/

LLDP

/

CDP

/

NAT

 

to configure the network.

Press the

 

Menu

 

soft key when the phone is idle, select

 

Advanced 

(default password: admin)->

Accounts 

to 

configure theaccount. 

2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" 

    or "192.168.0.10") and then press the 

Enter

.

Register Status:            
Line Active:            
Label:                          
Display Name: 
User Name: 
Register Name: 
Password: 
Server Host: 

3. Enter the user name (default: admin) and password (default: admin) in the login page and click 

   Confirm

.

Network Settings:  

Click on

 

Network

->

Basic

->

IPv4 Config

Registered

(Green)

3

Configuring Your Phone

Note:

 

The IP phone also supports IPv6, but IPv6 is disabled by default.

         The wrong network settings may result in the inaccessibility of your phone and may have an impact on the 

         network performance. Contact your system administrator for more information. 

         

Note:

 

Check with your system administrator if any error appears during the registration process or a specific 

         configuration is required for your registration.

Note:

 

For more information on account parameters, refer to

 

Configuring via web user interface 

above.

 

Register Failed

(Gray)

Registering

(Yellow)

Summary of Contents for SIP-T29G









Reviews: