background image

3. Connect the USB flash drive, as shown below:

4. Connect the network and power, as shown below:

You have two options for network and power connections. Your system administrator will advise you which one 

to use.

After the IP phone is connected to the network and 
supplied with power, it automatically begins the 
initialization process. After startup, the phone is ready
for use. You can configure the phone via phone user 
interface or web user interface.

2

Startup

Note: 

The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party 

          power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we 

          recommend that you use the Ethernet cable provided by Yealink.

          If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch 

          is PoE-compliant.

Note:

 

The USB port can also be used to connect the 

Bluetooth USB dongle BT40 or 

Wi-Fi USB dongle WF40. 

The 

          Bluetooth USB dongle BT40 and 

Wi-Fi USB dongle WF40 

should be purchased separately. For more 

          information on how to use the BT40 and WF40, refer to Yealink Bluetooth USB Dongle BT40 User Guide 

          and 

Yealink Wi-Fi USB Dongle WF40 User Guide

     PoE Hub/Switch

AC Power Option

PC Connection

   (Optional)

Power Adapter

      (DC 5V)

A

PoE (Power over 

Ethernet) Option

PC Connection

   (Optional)

IEEE 802.3af compliant

B

PC

PC

Summary of Contents for SIP-T29G









Reviews: