Yealink SIP-T27G, Quick Start Manual

Page: 6 / 8

5
Speed Dial
To configure a speed dial key:
To use the speed dial key:
4. Press the End Call soft key to disconnect all parties.
1. Press the Menu soft key when the phone is idle, and then select Features -> DSS Keys .
2. Select the desired DSS key, and then press the Enter soft key.
4. Press the Save soft key to accept the change.
Press the speed dial key to dial out the preset number.
3. Select
SpeedDial
from the
Type
field, select the desired line from the
Account ID
field, enter a label in the
Label field and then enter the number in the Value field.
Call Conference
Call Forward
To enable call forward:
Always Forward---- Incoming calls are forwarded unconditionally.
Busy Forward---- Incoming calls are forwarded when the phone is busy.
No Answer Forward---- Incoming calls are forwarded if not answered after a period of time.
1. Press the Menu soft key when the phone is idle, and then select Features -> Call Forward .
2. Select the desired forward type:
3. Enter the number you want to forward to. For No Answer Forward
,
press or to select the desired
ring time to wait before forwarding from the After Ring Time field.
4. Press the Save soft key to accept the change.
1. Press or the Conf soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press or the Conf soft key again when the second party answers. All parties are now joined in the
conference.
If there is more than one call on hold, press or to select the desired call, and then press or the
Resume soft key.
Semi-Attended Transfer
Attended Transfer
Blind Transfer
Call Transfer
You can transfer a call in the following ways:
1. Press or the Transfer soft key during an active call. The call is placed on hold.
1. Press or the Transfer soft key during an active call. The call is placed on hold.
1. Press or the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press the Send soft key.
3. Press or the Transfer soft key when the second party answers.
2. Enter the number you want to transfer to, and then press the Send soft key.
3. Press or the Transfer soft key when you hear the ring-back tone.
3. Press or the B Trans soft key.
2. Enter the number you want to transfer to.
Note: You can split the conference call into two individual calls by pressing the Split soft key.