4. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you which one
to use.
After the IP phone is connected to the network and
supplied with power, it automatically begins the
initialization process. After startup, the phone is ready
for use. You can configure the phone via phone user
interface or web user interface.
Startup
2
Note:
The IP phone should be used with Yealink original power adapter (5V/1.2A) only. The use of the
third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone
,
we recommend that you use the Ethernet cable provided by Yealink.
I
f inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch
is PoE-compliant.
Note:
The USB port can also be used to connect Bluetooth USB dongle BT40/BT41 or Wi-Fi USB dongle
WF40/WF50. The Bluetooth USB dongle BT40/BT41 or Wi-Fi USB dongle WF40/WF50 should be
purchased separately. For more information on how to use the BT40, BT41, WF40 or WF50, refer to
Yealink Bluetooth USB Dongle BT40 User Guide, Yealink Bluetooth USB Dongle BT41 User Guide,
Yealink Wi-Fi USB Dongle WF40 User Guide or Yealink Wi-Fi USB Dongle WF50 User Guide
.
3.
Connect the USB flash drive, as shown below:
PC Connection
(Optional)
IEEE 802.3af compliant
PoE Hub/Switch
A
B
AC Power Option
PoE ( Power over
Ethernet ) Option
PC
PC Connection
(Optional)
Power Adapter
(DC 5V)
PC
