15
Registering Phone
© 2003 - 2012 Bicom Systems
Open a new browser window and enter your phone IP address in order to access
the phone web administration interface login screen. Example:
http://192.168.1.22
Login to phone web administration interface with your username and password.
Please note, factory default login details are username: admin and password:
admin.
Click on
Upgrade
tab.
Click
Advanced
tab.
URL
In the
URL
field enter the Hostname.
- Example for the Hostname:
bicomsystems.com
Make sure you replace Hostname from this example with your PBXware
Hostname.
Make sure DNS server is configured to automatically route registration request to a
PBXware which is actually under another domain name, example:
newbicomsystems.com
.
Check New Config
Select
Power on + Repeatedly
.
Click on the
Confirm
button.
You'll have to wait sometime prior for the device to save changes.
Click on the
Auto Provision
button to run auto provisioning process, then you'll be
asked to confirm action. To continue click on
OK
button.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above
described, you should have successfully registered your phone to PBXware. Dial
*123
to verify registration.
5
Configure BLF
This chapter describes how to configure BLF (Busy Lamp Field) for Yealink phones.
N O TE
B LF (B usy Lam p Field) supported only with Y ealink phone m odel SIP-T 26P and
SIP-T 28P.
The following topics are covered: