3
Connection
4
Note:
The USB port is used to connect the WPP20 to pair with the RoomCast manually if you purchase the WPP20
separately or the RoomCast Access Point is modified.
Setting up RoomCast
5
TV
• If you connect to a wired network
：
①
Connect the PC to the same LAN
.
②
Open a web browser and enter the device IP address (displayed in the
bottom-right corner of the display) in the address bar.
The default administrator username is “admin” and password is “0000”.
• If you do not connect to the network
：
①
Connect the PC to the wireless AP provided by RoomCast.
(The AP name and password are displayed on the display, and the default name
is Yealink-XXXXXX)
②
Open a web browser and enter the device IP address (192.168.144.1) in the
address bar.
The default administrator username is “admin” and password is “0000”.
After powering on the RoomCast, you can perform basic settings, network
configuration and system settings through the web user interface:
Note:
If you do not connect to a wired network, you can connect to the wireless network after accessing the web
user interface through the above methods.
E
N
G
L
I
S
H
