Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
328
Values
0, 1 (for CP960)
Default
Blank
Web UI
Settings > Dial Plan > Block Out > Account
[1]
X is from 1 to 10.
Example: Adding Replace Rules Using a Replace Rule File
The following example shows the configuration for adding replace rules.
Customize the replace rule template file and place this file to the provisioning server “http://192.168.10.25”.
Example
dialplan_replace_rule.url = http://192.168.10.25/DialPlan.xml
After provisioning, the rules defined in this file are added to the IP phone, and you can use the replace rules on the
phone.
Dial Plan Defined by Digit Map (New Dial Plan Mechanism)
Digit maps, described in
, are defined by a single string or a list of strings. If a number entered matches
any string of a digit map, the call is automatically placed. If a number entered matches no string - an impossible
match - you can specify the phone’s behavior. You can specify the digit map timeout, the period of time before the
entered number is dialed out.
Topics
Basic Regular Expression Syntax for Digit Map
Digit Map for All Lines Configuration
Digit Map for a Specific Line Configuration
Basic Regular Expression Syntax for Digit Map
You need to know the following basic regular expression syntax when creating a new dial plan:
T
The timer letter “T” indicates a timer expiry. If “T” is used alone (for example, 123T), the default timeout
value of 3 will be used. If “T” is not used alone (for example, 123<Tx>, x can be a digit from 0 to 99), a
complete match occurs when waiting x seconds after inputting 123.
x
The “x” can be used as a placeholder for any digit from 0 to 9.
Example:
“12x” would match “121”, “122”, “123”, and so on.
[]
The square bracket "[]" can be used as a placeholder for a single character which matches any of a set
of characters. Example:
"91[5-7]1234" would match “9151234”, “9161234”, “9171234”.
-
The dash “-” can be used to match a range of digits within the brackets.
Example:
“[35-7]” would match the number “3”, “5”, ”6” or ”7”.
Note: The digits must be concrete, for example, [3-x] is invalid.
.
The dot “.” can be used as a placeholder or multiple placeholders, including zero, of occurrences of the
preceding construct.
Examples:
“123.T” would match “123”, “1233”, “12333”, “123333”, and so on.
Summary of Contents for One Talk CP960
Page 1: ......