| Basic Settings of Teams Room Systems |
63
•
Adjusting the Camera Layout
Procedure
1.
Tap
to enter the Camera Control page.
If you are in a meeting, tap
>
to enter the Camera Control page.
2.
Tap
Camera Layout
.
3.
Select the desired layout and do the following settings:
•
Fullscreen
: Drag the camera from the camera list into the left picture to switch the camera displayed
in full screen.
•
Division:
You can select the desired mode from the drop-down menu on the right side of the division mode.
Drag the camera in the division mode to switch the camera display positions.
•
Surround:
You can select the desired mode from the drop-down menu on the right side of the surround mode.
Drag the camera in surround mode to the specified position.
4.
Tap
Apply
.
Single and Dual External Display
To fully enjoy the video and content sharing in the meeting, we recommend that you connect at least one
external display to the MCore/Mini-PC. If you connect two external displays, the second screen will display
the shared content in full screen.
Note:
If you want to use two external displays, make sure the dual monitor mode is enabled.
•
•
•
Single Screen Layouts
The following introduces the default layout when you connect one display screen.
Only Video Calls
Video Calls with a Presentation
