Yealink MP58, User Manual

Page: 59 / 73

| Wireless Network |
59
• Activating the Wi-Fi Mode
• Connecting to the Wireless Network
• Viewing the Wireless Network Information
• Deactivating the Wi-Fi Mode
• Disconnecting the Wireless Network Connection
Activating the Wi-Fi Mode
Before you begin
Make sure the Wi-Fi USB Dongle WF50 is connected to the T56A phone.
Procedure
1.
Go to >
Settings
>
Device Settings
>
Wi-Fi
.
2. Turn on Wi-Fi .
Connecting to the Wireless Network
There are three ways to connect the device to the wireless network.
• Connecting to an Available Wireless Network Manually
• Connecting to the Wireless Network Using WPS
• Adding a Wireless Network manually
Connecting to an Available Wireless Network Manually
Before you begin
Get the password of the wireless network from your system administrator.
Make sure that the Wi-Fi mode is activated.
Procedure
1.
Go to >
Settings
>
Device Settings
>
Wi-Fi
.
2.
Tap >
Scan
to search the available wireless network.
3. Select the desired wireless network.
4.
If the network is secure, enter its password.
5. Tap CONNECT .
Related tasks
Activating or Deactivating the Wi-Fi Mode
Connecting to the Wireless Network Using WPS
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless networks,
which can automatically configure a wireless network with a network name (SSID) and strong WPA data
encryption and authentication.
About this task
Two methods supported by Yealink devices in the Wi-Fi protected setup:
Downloaded from ManualsNet.com search engine