Steps
：
1
32
4
VC800 Codec Installation
3
Open the baffle.
Push the bracket along the track of the V800 codec.
Remove one Velcro.
Put the bracket on the top of the TV.
Stick a Velcro onto the back of the TV, and make sure that the bracket and the back of the TV are tightly positioned against each
other.
TV
5
4
5
Notice the direction of the bracket
Mount on top of a TV
Please choose the following installation method when the thickness of the TV is between 16mm and 55mm.
Select one of the following installation method based on your site requirements:
a. Put on a Flat Surface b. Mount on top of a TV c. Mount on a wall d. Mount on a ceiling e. Mount onto a TV stand or a tripod
Put on a Flat Surface
You can put the VC800 codec on a conference room table, and make sure that the slope is not more than 5 degrees so that the VC800
can operate correctly.
Please choose the following installation method when the thickness of the TV is between 50mm and 100 mm.
TV
5
6
4
3
2
1
2
3
1
Notice the direction of the bracket
If your VC800 codec cannot be mounted on the top of a TV when the bracket
has reached the given location, remove the bracket, and then convert its
direction. Refer to the following section for more information.
2