Yealink MeetingSpace VC500, Administrator'S Manual, Page: 229 / 281

Configuring Security Features
213
Configuring Security Features
This chapter provides information for making configuration changes for the following
security-related features:

User Mode

Administrator Password

Web Server Type

Transport Layer Security

Secure Real-Time Transport Protocol

H.235

Defending against Attacks

System Integrated with Control Systems
User Mode
Two roles are supported for accessing the system, an admin role and a user role. Admins can
perform administrator activities such as changing configuration. Users can perform only
user-type activities. You need to configure a password for the user when the user mode is
enabled.
After the user mode is enabled, the user can log into the web user interface of the system with
user credentials. The default user name is “user”.
User mode parameters on the system are described below:
Parameter Description Configuration Method
User Type
Specifies the user type.
Default:
Administrator
Note:
To enable the user type, you
need to select User for this
parameter.
Web User Interface
User Mode
Enables or disables the user mode.
Default:
Disabled
Note:
It is only applicable to the
user. The administrator mode is
enabled by default.
Web User Interface
User Password
Configures a password for the user
to access the menus or log into the
Web User Interface