Yealink MeetingSpace VC500, Administrator'S Manual, Page: 231 / 281

Configuring Security Features
215
Parameter Description Configuration Method
Note:
The default administrator
password is “0000”.
New Password
Configures a new administrator
password.
Note:
You can leave the password
blank.
Remote Control
Web User Interface
Confirm Password
Enters the new configured
administrator password.
Note:
The entered password must
be the same as the one configured
by the parameter “New Password”.
Remote Control
Web User Interface
To configure administrator password via web user interface:
1.
Click on
Security
->
Security
.
2.
Select
Administrator
from the pull-down list of
User Type
.
3.
Enter the old administrator password in the
Old Password
field.
4.
Enter a new password in the
New Password
field.
5.
Enter the new password or leave it blank in the
User Password
field.
6.
Click
Confirm
to accept the change.
To configure administrator password via the remote control:
1.
Select
More
->
Setting
->
Advanced
(default password: 0000)->
Password Reset
.
2.
Enter the old password in the
Current Password
field.
3.
Configure a new password in the
New Password
and
Confirm Password
fields.
4.
Select
Save
, and then press to accept the change.
Web Server Type
Web server type determines the access protocol of the system’s web user interface. The system
supports both HTTP and HTTPS protocols for accessing the web user interface. HTTP is an
application protocol that runs on top of the TCP/IP suite of protocols. HTTPS is a web protocol