| Content Sharing |
27
Using WPP20 Wireless Presentation Pod
In a meeting room, you can connect WPP20 to your PC with HDMI cable for content sharing.
Note:
If you cannot present after connecting WPP20 to the PC, refer to
Presentation Pod Quick Start Guide
to pair the system and WPP20.
•
•
Switching the Shared Content via WPP20
•
Stopping Sharing Content via WPP20
Sharing Content via WPP20
Before you begin
Make sure the computer is powered on and you connect the WPP20 wireless presentation pod to your PC.
Procedure
1.
Do one of the following:
• On the WPP20, press the presentation button to share the full screen of the PC.
• On the WPP20, long press the presentation button for 3 seconds and then release this button. Select
the file or window you want to share and then click
Share Now
.
• On the Yealink Wireless Presentation Pod software, click
Contents Share
, select the file you want to
share, and then click
Share Now
.
The computer content is automatically projected to the device.
2.
Click
Annotation
on the navigation bar to make notes on the shared content with the corresponding
tools.
Related information
Introduction of WPP20 Note Toolbar
Introduction of the WPP20 Whiteboard Note Toolbar
Switching the Shared Content via WPP20
Procedure
1.
On the Yealink Wireless Presentation Pod software, click
New Share
.
2.
Select the file or window you want to share and then click
Start Sharing
.
Stopping Sharing Content via WPP20
Procedure
Do one of the following to stop sharing content:
Summary of Contents for MeetingEye 600
Page 1: ......