Yealink EXP43, Quick Start Manual

Page: 5 / 8

The conference key allows you to set up a conference with a third party when already in
a call.
1. Click on
Dsskey -> Ext Key .
2. In the desired DSS key field, select Conference from the Type drop-down menu.
3. Enter the phone number or extension of the destination party in the Value field.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Click Confirm to accept the change.
You can press the hold key to hold and retrieve a call.
You can press the DND key when the phone is idle to activate or deactivate the DND mode.
1. Click on
Dsskey -> Ext Key .
2. In the desired DSS key field, select DND from the Type drop-down menu.
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Click Confirm to accept the change.
Conference
1. Click on
Dsskey
->
Ext Key
.
2. In the desired DSS key field, select Hold from the Type drop-down menu.
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Click Confirm to accept the change.
When there is an incoming call, you can press the forward key to forward the incoming
call to the pre-defined destination number.
1. Click on
Dsskey -> Ext Key .
2. In the desired DSS key field, select Forward from the Type drop-down menu.
3. Enter the destination number to forward the incoming calls to in the Value field.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Click Confirm to accept the change.
You can press the transfer key to perform a Blind/Semi-Attended/Attended transfer during
a call.
1. Click on
Dsskey -> Ext Key .
2. In the desired DSS key field, select Transfer from the Type drop-down menu.
3. Enter the phone number you want to transfer the call to in the Value field.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Click Confirm to accept the change.
You can place a call back to the caller of the last incoming call by pressing the ReCall key.
1. Click on
Dsskey -> Ext Key .
2. In the desired DSS key field, select Recall from the Type drop-down menu.
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Click Confirm to accept the change.
Forward
Transfer
Hold
DND
ReCall
4