Transfer
Hold
You can assign a feature to a DSS key via phone user interface. Press the desired DSS key of EXP40
for about 5 seconds, the phone LCD screen will prompt the setting of this key. The following sections
provide you with detailed instruction of assigning some frequently used features to the DSS keys
via web user interface.
The conference key allows you to set up a conference with a third party when already in a call.
1. Click on
DSSKey
->
Ext Key
.
2. In the desired DSS key field, select
Conference
from the pull-down list of
Type
.
3. Enter the phone number or extension of the destination party in the
Value
field.
4. Enter the desired value in the
Label
field.
5. Click
Confirm
to accept the change.
You can press the hold key to hold and retrieve a call.
You can press the DND key when the phone is idle to activate or deactivate the DND mode.
1. Click on
DSSKey
->
Ext Key
.
2. In the desired DSS key field, select DND from the pull-down list of
Type
.
3. Enter the desired value in the
Label
field.
4. Click
Confirm
to accept the change.
Conference
1. Click on
DSSKey
->
Ext Key
.
2. In the desired DSS key field, select
Hold
from the pull-down list of
Type
.
3. Enter the desired value in the
Label
field.
4. Click
Confirm
to accept the change.
When there is an incoming call, you can press the forward key to forward the incoming call to the
pre-defined destination number.
1. Click on
DSSKey
->
Ext Key
.
2. In the desired DSS key field, select
Forward
from the pull-down list of
Type
.
3. Enter the destination number you want to forward the incoming calls to in the
Value
field.
4. Enter the desired value in the
Label
field.
5. Click
Confirm
to accept the change.
You can press the transfer key to perform a Blind/ Semi-Attend/Attended transfer during a call.
1. Click on
DSSKey
->
Ext Key
.
2. In the desired DSS key field, select
Transfer
from the pull-down list of
Type
.
3. Enter the phone number you want to transfer the call to in the
Value
field.
4. Enter the desired value in the
Label
field.
5. Click
Confirm
to accept the change.
You can place a call back to the caller of the last incoming call by pressing the ReCall key.
1. Click on
DSSKey
->
Ext Key
.
Forward
Transfer
Hold
DND
ReCall
2. In the desired DSS key field, select
ReCall
from the pull-down list of
Type
.
3. Enter the desired value in the
Label
field.
4. Click
Confirm
to accept the change.
The EXP40 supports 40 DSS keys in two screen page. Each page displays 20 DSS keys. You can
press or to switch between the two pages and use your desired DSS key.
4
Basic Configurations
