4
enable the DD phone mode first.
To enable the DD phone mode when the IP phone is
powered on (only for firmware version 84 or later):
1. Insert the DD10K.
The phone screen prompts you whether to switch to the DD
phone mode.
2. Press the
OK
soft key to continue, and the phone switches to
the DD phone mode after rebooting.
To enable the DD phone mode when the IP phone is
powered off:
1. Insert the DD10K.
2. Power on the IP phone.
The IP phone switches to the DD phone mode automatically
after startup.
If you purchase the DD10K package, you should manually
register the DD phone to one Base station.
Registration
You can register the DD phones to W70B/W80 Multi-Cell
System/W90 Multi-Cell System. Each DD phone can be
registered to only one base station.
Before registering the DD phone, make sure the base station is
in registration mode (long press on the base station till the
registration LED flashes).
To register the DD phone when the phone prompts
“Unregistered!”, do one of the following:
•Press the
Reg
soft key to register quickly.
•a.Do one of the following:
– Press the OK soft key, and then select
Register Handset
.
–Press
, and then select
Settings
>
Registration
>
Register Handset
.
The IP phone begins searching for the base station.
b. Press the
OK
soft key after a base station is found
successfully.
c. Enter the base station PIN (default: 0000), and then press the
OK
soft key to complete registration.
Note:
• If the DD phone is registered to the base station successfully, the phone
prompts “Subscribed Succeed”.
• I f the DD phone prompts “Searching for Base”, check whether your base
station is powered on or not.
