3
–Press the OK soft key, and then select
Register Handset
.
–Press
, and then select
Settings
>
Registration
>
Register Handset
.
The handset begins searching for the phone.
b.Press the
OK
soft key after a phone is found.
c. Enter the base station PIN (default: 0000), and then press the
OK
soft key to complete the registration.
Note:
• If the handset is registered to the phone successfully, the phone
prompts “Subscribed Succeed”.
• If the handset prompts “Searching for Base”, check whether your
phone is in the handset registration mode or not.
Switching between DD Phone and CC Phone
Modes (for T54W)
1. Assemble the DD10K.
2. Press the
Menu
soft key when the phone is idle, and then
select
Status
->
Phone Mode
.
3. Select the desired mode and click
OK
.
The phone will reboot to make the change take effect.
Checking the Dongle Status
(for T58V/T58A/T58W/T56A/T53/T53W/T54W/
T57W/VP59)
To check the dongle status for T58V/T58A/T58W/T57W/T56A
/VP59:
1. Insert the DD10K.
2. Swipe left or right to go to the second idle screen.
3.
Navigate to
Settings
->
Status
->
Dongle
.
To check the dongle status for T53/T53W/T54W:
1. Insert the DD10K.
2. Press the
Menu
soft key when the phone is idle, and then
select
Status
->
Dongle Status
.
Getting Started (for T41S/T42S/T54W)
DD Phone Mode
Before using a IP phone as a DECT desk phone, you should
