Yealink CP930W Telesystem User Manual Download

Page: 28 / 119

| Getting Started |

•

Accessing a Submenu Feature

Accessing a Submenu Feature

After entering a certain menu, you can use the navigation keys to access the desired submenu.

Procedure

Press the up and down navigation keys to highlight the desired submenu.

Press

to open the submenu.

Press the On-hook key or

Back

to return to the previous screen.

Returning to Idle Screen

Procedure

Long press the On-hook key to quickly exit the menu and return to the idle screen.

Screen and Icons

The user screens and icon indicators can help you navigate and understand the important information on
the phone's status.

•

Idle Screen

•

Calls Screen of CP930W

•

Calls Screen of CP935W

•

W73H/W78H/W56H/W53H/W59R/W57R Line Status Screen

•

Icons on the Idle Screen

•

W73H/W78H/W56H/W53H/W59R/W57R Icons on the Calls Screen

•

W73H/W78H/W56H/W53H/W59R/W57R Icons on the Line Status Screen

Idle Screen

The idle screen is made up of the signal strength, battery status, status bar, handset name, and soft keys.
The time & date is displayed in the middle of the screen.

On the CP930W/DD phone/CP935W, the default account also displays on the idle screen.

W73H:

Summary of Contents for CP930W Telesystem
























































































































Search results

Summary of Contents for CP930W Telesystem

Reviews:

Related manuals for CP930W Telesystem

Brands by name

Popular brands

Yealink CP930W Telesystem, User Manual

Search results

Summary of Contents for CP930W Telesystem

Reviews:

Related manuals for CP930W Telesystem

Brands by name

Popular brands