Yealink CP930W Telesystem User Manual Download Page 31

Page: 31 / 119

| Getting Started |

•

Battery Status

Low to full:

(W59R/W57R/W56H/W53H/W73H/W78H),

(CP930W),

(CP935W)

Need Charging:

(W59R/W57R/W56H/W53H/W73H/W78H),

(CP930W),

(CP935W)

•

Status Bar

: Displays the feature status icons. The status icons are displayed when features are

activated.

•

Handset Name

: Displays internal handset number and registered handset name (for example, “1” is

internal handset number, indicating the handset is the Handset 1 of the base station).

•

Soft Keys

: The soft key labels on the screen directly above the soft keys show the functions available at

that particular moment. (It is not applicable to CP935W).

Calls Screen of CP930W

All of your active and held calls are displayed on the calls screen.

Calls Screen of CP935W

All of your active and held calls are displayed on the calls screen.

Summary of Contents for CP930W Telesystem
























































































































Search results

Summary of Contents for CP930W Telesystem

Reviews:

Brands by name

Popular brands

Yealink CP930W Telesystem, User Manual

Search results

Summary of Contents for CP930W Telesystem

Reviews:

Brands by name

Popular brands