Service Hotline: 400-666-9216
http://www.ydeachn.com/
Address: Bao'an District of Shenzhen City white pine Road of Founder Technology Park A1 building 4 floor
5) Click the [SCREEN CONNECTION SETTINGS] on the top of the screen. You need to set
Screen connection in the interface.
[Port]:
Mdea has two output ports, labeled "OUT1" and "OUT2", using which port to output, and
you Should select [port1] or [ port2] in this interface. In the bottom of the port, select [Simple
Screen].
[Screen turn]:
The program support screen rotation, this menu is useful. The default is 0.
[Number]:
Width: Number of receiving card used horizontally; height: Number of receiving card
vertical use.
[Size]:
Width: a cassette receiving points in the horizontal direction of the display; Height: a
receiving cassette display dots in the vertical direction.
[Connection]:
to display the actual signal lines, select the corresponding connections can be. After
all the parameters are set, click on the bottom right corner of the [send].
6) At this point in C3.0A mode and C3.0B mode, all the settings have been completed. Display can
be normal lighting.The next interface of [SCREEN CONNECTION SETTINGS] do not have to
make any settings.
Micro mode
1
）
Click button in the top right corner on the screen, then click [Function] in the pull-down menu.On
the menu of [Selecting the version] you can find three versions.Here you need to select Micro. After
setting, click [Back] button.on the bottom of the screen.
