Passion IA350 MKII Integrated Amplifier
Discovering your IA350 MKII: Front view
Using your YBA remote control
P O W E R
1
0
2
2
3
4
6
5
Select the device you want to control between AMP, CD
control the IA350 MKII, you need to select AMP button.
Note: AMP will remain the active function until you select another
device.
and AUX. To
0
IMPORTANT NOTE:
PRESS
means a short press on a key.
HOLD
means a key press
for more than 3 seconds
.
/SOURCE-: Press /SOURCE- to skip to the desire
source.
d
2
VIEW: Hold (> 3 seconds) display brightness dims. Hold again display
turns off. Hold again, display turns on.
3
4
FCT: Hold to store current volume level.
5
AUDIO: Press to resume to the stored volume level.
6
MUTE: Press to mute. Press again to exit mute.
Point your remote control to the IR receiver located in the display
window of your IA350 MKII.
1
www.ybahifi.com
3
1
2
4
Page 6
/VOLUME-: Press + to increase volume, or - to decrease the
output volume of the amplifier. This is a universal control and does not
require specific source selection.
Input selector: Selects between the eight different inputs.
3
4
Volume control: To adjust volume, set to zero upon installation.
DISPLAY and IR sensor: All information relating to the operation of your IA350 MKII appears
here. Point the remote control to this zone to control your IA350 MKII from a distance.
1
2
ON/OFF switch: Use this button to switch ON or switch OFF your IA350 MKII.
