Heritage R100 Streaming Music Centre
Discovering your R100: Rear view
Before connecting or disconnecting any input or output always make sure your
is in the OFF position.
If you
R100
have any doubt, unplug the AC cable from the power inlet.
Make sure all components connected to your amplifier are all set to off.
Neatly arrange and organize wiring to and from your R100 and to and from all your components. Separate
AC wires from audio cables to prevent hum or other unwanted noise from being introduced into the system.
CAUTION
Heritage R100 Streaming Music Centre
5
Discovering your R100: Rear view
Ground
This is a terminal that facilitates the tone arm shield cable to connect directly
to the chassis of the
to eliminate any radio interference or hum from the
signal.
R100
1
RCA outputs 1 and 2
RCA audio inputs
This input is only for use with a turntable with MM cartridge.
2
Phono input
Connect the RCA outputs of your source to the RCA inputs of your R100. Be
sure to connect the RIGHT output of your source to the R input of your
amplifier and the LEFT output to the L input of your amplifier.
Your R100 allows the connection of 2 external, line level sources in addition
to the phono input.
4
3
Pre-amplified output. If you want to use a subwoofer, a separate power
amplifier or some active speakers, use this connection
5
6
www.ybahifi.com
P 7
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
