Right and Left speaker output: When connecting speakers take care to connect in phase.
speaker must be connected to the + of the A200S. Connect your RIGHT speaker to the R output of
your A200S and the LEFT speaker to the L output. We recommend the use of banana plugs to prevent
any short-circuit. The A200S can be used with 8Ω or 4Ω speakers.
The + of your
6
Heritage A200S Integrated Amplifier
Page 8
www.ybahifi.com
7
Power inlet: Use the mains cable provided with your A200S. Be sure the switch is in OFF position before
plugging or unplugging the mains cable.
10
8
Bluetooth instructions
Your A200S has a built-in CSR8675 bluetooth V5.0 module. Supports high quality music output.
Switch the A200S source to "BT" status.
After selecting "BLUETOOTH" ensure your device (i.e. phone or tablet) has Bluetooth switched on. It
will show YBA A200S. Select this on your device and it will pair with the YBA A200S.
When the device is connected, use the playback software to play music.
9
USB input: The USB input allows a direct connection to a PC/Mac; The A200S operation is fully
independent of your computer built-in soundcard and will operate whether your computer has a
soundcard or not.
This input can also be used for connection to a digital streamer or network player.
This input does not support an external hard drive.
The A200S has an integrated Bluetooth aerial which provides greater transmission distance.
Optical digital input: Connect to optical output from a digital audio source by an optical cable.
