Heritage A200S Integrated Amplifier
Page 6
www.ybahifi.com
Discovering your A200S: Front view
ON/OFF switch: Use this button to switch ON or switch OFF your A200S.
Input selector: Selects between the nine different inputs.
2
4
Volume control: To adjust volume, set to zero upon installation.
3
1
2
4
DISPLAY and IR sensor: All information relating to the operation of your A200S appears here.
Point the remote control to this zone to control your A200S from a distance.
Using your YBA remote control
1
Select the device you want to control between AMP, CD
control the A200S, you need to select AMP button.
Note: AMP will remain the active function until you select another
device.
and AUX. To
0
Note:
PRESS
means a short press on a key while
HOLD
means to keep the key
pressed for more than 3 seconds.
/SOURCE-: Press /SOURCE- to skip to the desire source.
d
2
3
4
FCT: Hold to store current volume level.
5
AUDIO: Press to resume to the stored volume level.
6
MUTE: Press to mute. Press again to exit mute.
Point your remote control to the IR receiver located in the display
window of your A200S.
1
2
3
1
0
2
2
3
4
6
5
VIEW: Press to dim/brighten the display.
/VOLUME-: Press + to increase volume, or - to decrease the
output volume of the amplifier.
This is a universal control and does not
require specific source selection.
