Genesis IA3A Integrated Amplifier
Discovering your IA3: Front view
ON/OFF switch: Use this button to switch ON or switch OFF your IA3A.
Source selector: Selects between the six different inputs.
5
Using your YBA remote control
1
Select the device you want to control between AMP, CD and AUX. To
control the IA3A, you need to select AMP button.
Note: AMP will remain the active function until you select another device.
0
Note:
PRESS
means a short press on a key while
HOLD
means to keep the key
pressed for more than 3 seconds.
/SOURCE-: Press /SOURCE- to skip to the desired
source.
2
/VOLUME-: Press + to increase volume, or - to decrease the
output volume of the amplifier. This is a universal control and does not require
specific source selection.
VIEW: Hold (> 3 seconds) the display brightness dims. Hold again and the
display turns off. Hold again and the display turns on.
3
4
FCT: Hold to store the current volume level.
5
AUDIO: Press to return to the stored volume level.
6
MUTE: Press to mute. Press again to exit mute.
Point your remote control to the IR receiver located in the display window
of your IA3A.
1
2
www.ybahifi.com
3
1
0
2
2
3
4
6
5
Source
Volume
G e n e s i s I A
3
CD
63
3
2
1
4
3
5
IR sensor: Point the remote control to this zone to control your IA3A from a distance.
4
Display: Displays current status of your IA3A.
Volume control: Two toggle switches control the volume.
Page 6
Summary of Contents for Genesis IA3A
Page 2: ......
