background image

never been used or not been used for a while to few seconds when the 
device is regularly used.

Charging and Switching On

The device has an internal rechargeable battery which must be charged 
before use. Before the first use we recommend the device is left on charge 
for a minimum of 8 hours.

Your Device can be charged from any USB compatible charging device, 
although we recommend you use the provided charger whenever possible.

To charge the unit:

• Connect the charger to a wall outlet
• Attach the USB cable to the charger
• Unscrew the cap from the bottom to reveal the USB port
• Plug the USB cable into the USB port on the bottom of the device

When charging the light on the front of the keypad will be red. The red light 
will flash for 5 minutes when the unit has finished charging, and will then go 
off.

The estimated charging time to fully charge the device is 7 to 8 hours from 
completely discharged.

The device can be used whilst charging, however, the charging cycle will 
complete more quickly if the device is deactivated. The device can be used 
with a partially charged battery.

Your YB is now ready for use. You can turn it on by pressing and holding the 
OK button for 5 seconds.

Sending a basic alert

The alert button is located under the flap at the bottom of the unit. To trigger 
an alert, lift the flap and hold down the alert button for 5 seconds. The 
screen will display ‘Sending Alert’ and the YB will try to transmit an alert 
message.

If you are in an alert situation, ensure that you give your alert the best 
possible chance of sending by considering the orientation of the YB. Ensure 
it has a good view of the sky, or as good a view as is possible in your 
situation. The better the view of the sky, the more likely it is that your alert 
will be received.

The alert button will work even if the unit is deactivated.

4

Hints & Tips

Charging your unit from 
empty should take between 
6 and 8 hours, depending on 
the speed of the charger.

Some chargers will not 
provide as much power as 
others, and so the unit may 
charge more slowly.

When the unit has finished 
charging, the light on the front 
will flash red for 5 minutes, 
and then will go off.

Summary of Contents for V3 MkII

















Reviews: