9
Mounting the Z12
NOTE:
This portion of the assembly requires
lifting the Z12; two people are required.
Tools Required:
1. 9/16" wrench
2. Ratchet
3. 9/16" socket
1. Install the Hitch from the Custom Kit accord-
ing to the instruction sheet included in that
carton.
2. Slide the Z12 into the hitch.
3. Line up holes in the Hitch and Z12 and
secure with two (2) 3/8” wire lock pins.
4. Position the Hitch Brackets so that they are
aligned with the holes on the top plate of the
Hitch and the holes in the forward cross bar
of the Lower Frame.
5. Secure with four (4) 3/8” x 1-1/4” hex bolts,
four (4) 3/8” nylon lock nuts, and eight (8) 3/8”
flat washers.
ASSEMBLY
Hitch
Hitch
Bracket
Wire Lock
Pin
Upper
Frame
Lower
Frame