Yawarra nuxV 1600 Quick Start Manual Download Page 4

Page: 4 / 4

Dual rack mount nuxV 1600 – Quick Start Guide

Step 4

Connect to the serial console (optional)

If you want to configure your operating system via the console, you will need to connect to

the serial port via a null modem cable.

Terminal emulator settings

nuxV 1600 board: 115,200 baud, 8 bits, no parity, 1 stop bit, no flow control.

Step 5

Apply power

Connect IEC cable to socket at rear of case and turn switch to on.

The board will go through its boot up cycle, which you can watch if you are connected to the

serial console.

Your rack mount nuxV 1600 is ready to use!

Contact us

Please feel free to contact us if you have any queries regarding your rack mount nuxV 1600.

Yawarra Tiny Computers

Website www.yawarra.com.au

Phone

1300 859 799

Mail

PO Box 606, Boronia VIC 3155, Australia

April 2014

Summary of Contents for nuxV 1600

Page 1: ...x mounting kits to suit the nuxV 1600 board punched cover plate 2 x hex screws hex key board mounting plate hard drive mounting plate CPU heat bridge 13 x M3 x 5 screws 4 x M3 x 16 brass standoffs 2 x...

Page 2: ...3 1 Remove the five 5 screws from the top of the case and remove the top of the case 2 Attach the board to the mounting plate using the M3 x 16 standoffs Note Steps 3 to 10 are only required if you ar...

Page 3: ...oot the board The nuxV 1600 boards support many operating systems including BSD Linux and a number of proprietary operating systems Installation Insert the CF card into the socket label up Ensure the...

Page 4: ...trol Step 5 Apply power Connect IEC cable to socket at rear of case and turn switch to on The board will go through its boot up cycle which you can watch if you are connected to the serial console You...