YAUFEY PD221DE, User Manual

Page: 9 / 22

8. Swing Button
Used to make swing mode start or stop.
OPERATIONS
7. Continuously Dehumidify Button
In the standby state, press this button once to enter the Continuously Dehumidify Mode.
Humidity Settings
In the standby state, you can press the "SETTING" button to set the humidity level.
Pressing the button each time will increase the humidity by 5%RH. The humidity
range is 30%RH-80%RH. You can press and hold the button to set the humidity
faster. Leave it alone for a few seconds to exit the humidity setting.
Timer Setting
The timer setting is used to turn on or turn off the machine automatically.
Press this button to set a timer ranging from 1 hour to 24 hours of this machine. Press
the button to increase the timing by 1 hour. You can press and hold the button to
select your desired timer faster. If the timer is set to 00, this timing will be invalid.
When the timing function is enabled, the display will show the current humidity and
the remaining time.
Speed Setting
Press this button to switch the fan speed between the high and low speed.
Swing the Fan
In the standby state, you can press "SWING" button to let the fan blades swing back
and forth. Press the button again to stop the fan swinging. When the machine is
turned off, the fan will also stop swinging.
Working Mode
Dehumidify Mode: In this mode, you can set a desired room humidity. When the actual
room humidity is higher or lower than that you have set, the machine will start working
automatically. Drying Clothes Mode: In this mode, the air comes out of the compressor
and fan to dry your clothes. The fan speed cannot be adjusted. Continuously Dehumidify
Mode: In this mode, the fan speed can be adjusted, while the humidity cannot.