TROUBLESHOOTING
The dehumidifier does not work.
The socket is loose.
The light of "FULL"is on.
The room humidity is lower
than setting.
Please check the socket to ensure the
machine is charged.
Please remove the water from the tank
or replace the tank in its place.
Please reset the humidity setting of the
machine to ensure it is lower than the
humidity of the room.
Dehumidifying effect is not
obvious.Or the dehumidifier is
not removing moisture.
The dehumidifier is a little noisy.
The air turbine does not work.
The filter is dusty.
The inlet or outlet is blocked.
Doors and windows are open.
The room temperature or
humidity is too low.
The vibration may be caused by
uneven placement.
The filter is clogged.
The air turbine does not work.
The filter is clogged.
Please clean the filter and make sure
there is at least 10-inch space around the
dehumidifier.
Check that all doors and windows are
securely closed.
This is normal.
Please put the machine in a flat place.
Please clean the filter.
Please reassemble the air turbine or
remove the foreign objects.
Please clean the filter.
The display shows "E1","E2","H1"or "LO"
E1/E2
H1
LO
The component inside dehumidifier isunder open circuit or short circuit.
The indoor temperature is higher than 95
℉
.Skip level to air supply mode
The indoor temperature is lower than 32
℉
.Skip level to air supply mode
PROBLEMS
PROBABLE REASONS
SOLUTIONS
01
02
03
04
05
06
07
08
09
10
11
