YATO YT-82806, Manual

Page: 11 / 88

11
GB
O R I G I N A L I N S T R U C T I O N S
SPECIFICATION OF THE PRODUCT
Cordless impact wrench is an ordinary powered power battery tool used for loosening and tightening nuts and bolts. Due to the
battery power the key can work without access to a continous power source. Correct, reliable, and safe operation of the electric
device is dependent on its proper use, therefore:
Prior to working with the device, you should read all the instruction and keep it around.
For any damage caused by failure to comply with safety regulations and instructions of this manual, the supplier is not respon-
sible.
EQUIPMENT
The product is supplied in a complete state and requires no assembly. Together with the product there are provided: the recharge-
able battery and charging station (charger).
TECHNICAL PARAMETERS
Parameter Unit of measurement Value
Catalogue number YT-82806
Operating voltage [V] 18 DC
Rotation (idle) [min
-1
] 0 - 2000 / 0 - 2600
Impact frequency [min
-1
] 0 - 5000
Maximum torque [Nm] 350 / 700
Noise level
- acoustic pressure
[dB] 86,0 ± 3,0
- LWA power [dB] 97,0 ± 3,0
Protection grade IPX0
Insulation class III
Level of vibration (drilling / screwdriveting) [m/s
2
] 7,58 ± 1,5
Mass [kg] 1,8
Tool handle [”/mm] 1/2 / 12,5
Battery Li-Ion
Capacity of the battery [Ah] 3
Charger
Input voltage
[V] 220 - 240
Mains frequency [Hz] 50 / 60
Rated power [W] 50
Output voltage [V] 21,4 DC
Input current [A] 2
Time of charging** [h] 1,5
** charging time applies only to the battery with a capacity listed in table
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and speci fi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term “power tool” used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodi fi ed plug that fi ts the outlet reduces the risk of electric shock.