YATO YT-82152, Instructions Manual, Page: 13 / 108

13
EN
O R I G I N A L I N S T R U C T I O N S
PROPERTIES OF THE TOOL
The manual wood sawing machine is an electric ordinary tool, insulation class II, designed for cutting of wood surfaces and wood
derivatives surfaces – such as plywood, chipboard, MDF boards, etc., using circular saws. The sawing machine permits comfort-
able cutting of wood both in the vertical plane of the processed surfaces within an adjusted range of the cutting depth as well as at
a certain angle within the adjusted range between 0 0 and 45 0 . Cutting may also be carried out along a straight line. It is prohibited
to cut along curves (e.g. in circles), since this might cause an accident or imply damage to the saw and the electric tool. A correct,
reliable and safe operation of the tool depends on its correct use, so:
Read the operating manual thoroughly before work and keep it for future reference.
Attention! Under no circumstances can the tool be operated if the guards of the circular saw and the wedge are not
installed.
The supplier shall not be held responsible for any damage occurred as a result of failure to observe safety regulations and indica-
tions contained in this manual.
ACCESSORIES
The box supplied from the factory contains the following:
- sawing machine
- scaled guide
TECHNICAL PARAMETERS
Parameter Unit of measurements Value Value
Catalogue number YT-82152 YT-82154
Mains voltage [V] 220 - 240 220 - 240
Mains frequency [Hz] 50 50
Nominal power [W] 1500 2800
Insulation class II II
Nominal rotation [min
-1
] 4800 4800
Maximum cutting depth (0 O / 45 O ) [mm] 65 / 45 85 / 60
Circular saw
External diameter
[mm] 185 235
Internal diameter [mm] 20 25,4
Maximum thickness [mm] 2,8 3,0
Mass [kg] 4,23 7,75
Level of noise
- acoustic pressure L
pA
± K
pA
[dB(A)] 95,1 ± 3,0 99 ± 3,0
- acoustic power L
wA
± K
wA
[dB(A)] 106,1 ± 3,0 110 ± 3,0
Level of vibration a
h
± K [m/s 2 ] 2,860 ± 1,5 1,847 ± 1,5
Protection grade IPX0 IPX0
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and speci fi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term “power tool” used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodi fi ed plug that fi ts the outlet reduces the risk of electric shock.