FPCS1800A
18
EN
Getting
started...
Before you start
Assembly
Assemble the guide bar and saw chain before operation. Follow the
operating instructions step-by-step and use the pictures provided as
a visual guide to easily assemble the product.
Chain and guide bar
> Use only the guide bar (5) and
saw chain (4) according to the
technical data of the product.
> Place the product on a suitable flat
surface with the cover (10) facing
upwards.
> Loosen the retaining nut (9)
anticlockwise with the wrench (8)
and remove the nut as well as the
cover (10) (Fig. 1).
> Spread the saw chain (4) out with
the cutting edges of the chain
pointing in the rotational direction
and slide the chain into the groove
around the guide bar (Fig. 2).
Fig. 1
Fig. 2
WARNING! Read all the instructions carefully! Do
not connect the product to the power supply until it
is completely assembled! Always wear gloves during
assembly!
10
8
9
4
5
