8
Development Support Tool
8.6
Port Debug
8-11
HW1484528
HW1484528
8.6.1 Measuring Procedures
Select the "Debug" menu, and then select "Port Debug" when using the
MotoPlusIDE.
Select {Port Debug} when using MotoPlus Monitor.
1. When using MotoPlusIDE, select the controller to connect with.
2. Set the measuring conditions.
Time Range
Sets the displaying time [ms] for measuring data.
Port Number
Specify the number of the measuring port.
3. Press {Start} to start measuring in Port Debug. After starting, switch
{Start} to {Stop}. Press {Stop} to finish measuring.
Fig. 8-10: Port Debug Window
65/77