Front panel width
2.5 ... 6mm
Installation cutting (W x H)
123 x 99mm
Front panel (W x H)
140 x 116mm
Rear panel (W x H x D)
122 x 98 x 51mm
Installation depth
51mm
The degrees of protection are only guaranteed when the
following is observed:
–
Material thickness at the mounting cut-out: 2.5 ... 6mm
–
The deviation from the plane for the panel cut-out is
£
0.5mm. This condition must be fulfilled for the mounted
HMI device.
–
Permissible surface roughness in the area of the seal:
£
120µm (friction coefficient 120)
4.3" - 62E-MGC0-...
VIPA HMI
Hardware description
Dimensions
HB160 | TP-ECO | 62E-MGC0 | GB | 16-02
17
