3.2.2 VIPA Startup-Manager
As soon as the smartPanel is provided by power supply, the
VIPA Startup-Manager
will
be loaded. At the first startup of the
VIPA Startup-Manager
the following
start screen
appears.
n
There is a button on the
initial screen
with a counter, which counts backwards. If you
click on this button within this time, the project will start. If the time expires, the project
will start automatically. With the button
‘Main’
you get to the
‘selection menu’
.
n
A delay time of 5 seconds is default. In the
selection menu
under "Autostart" you can
adjust this time.
There are following buttons in the
selection menu
:
n
Settings
n
Info/Update
n
Autostart
n
Backup
n
Exit
n
Back
n
In [Settings] under
Change Settings
you can set a password for the Startup-Manager.
The password will be requested when interrupting the start countdown or before
closing the Startup-Managers by "Exit". By default, no password is defined.
n
In
Control Panel
[Open...] the system settings like brightness of the display can be
preset or the display can be re-calibrated. Here the MPI/DP slave interface may also
be configured. Further you get here the smartPanel information: product number,
serial number and licenses.
n
With [Create Screenshot] you can make a screen shot of the panel information and
select a destination for its storage.
With [Autostart] you define which runtime and which project will be started automatically
together with the smartPanel startup.
Start screen
Selection menu
Settings
Info/Update
Autostart
VIPA HMI
Deployment
Commissioning > VIPA Startup-Manager
HB160 | TP-smart | HA1-71A41-0 | en | 18-04
21
