The connection of USB sticks and USB drives by use of the "Host"-USB-A interface is
supported by the smartPanel. After connection the storage media is listed as
USB Hard
Disk
under
My Device
.
2.4 Dimensions
Front panel (L x H)
282 x 197 mm
Depth (D+T)
29 + 6 mm
Installation cutting (A x B)
271 x 186 mm
The degrees of protection are only guaranteed when the following is
observed:
–
Material thickness at the mounting cut-out: 1.5 ... 6mm
–
The deviation from the plane for the panel cut-out is
£
0.5mm. This
condition must be fulfilled for the mounted HMI device.
–
Permissible surface roughness in the area of the seal:
£
120µm (fric-
tion coefficient 120)
USB storage media
(USB 2.0)
Installation dimensions
VIPA HMI
Hardware description
Dimensions
HB160 | TP-smart | HA1-71A41-0 | en | 18-04
12
