background image

The login as web admin requires the following steps:

1.

Start the web browser at your PC and enter the following into the address bar: 

IP

address/webadmin

2.

Enter the following into the authentification:

n

User name: 

wince

n

Password: 

vipatp

3.6  Access to the network resources

n

The smartPanel allows you to access shared resources in a Microsoft network like

drives and printer. Here you may assign existing public directories or printer in the

network to local directories or printer in the smartPanel.

n

Condition for this is that you are logged in to the network with your user name and

password. The assignment of a network resource is performed in the smartPanel via

the command console "Command Prompt". Start the command console with 

‘START

è

 Programs

 

è

 Command Prompt’

.

n

The access to the network resource is performed with the commands 

Net view

 and

Net use

.

n

Shared resources of a network PC can be listed by the command: \> 

net view PC-

Name

n

For example 

net view testserver

 lists all shared resources of the network PC

"test server". To test the physical connection a PING to the IP address of the network

PC may be executed if there are problems while contacting the network PC.

The connection of a local name at the smartPanel with a shared drive of the network PC

happens with the following approach:

1.

Enter the following in the command prompt: \> 

net use local_name \

\network drive /user:User name

2.

Enter 

user name, password

 and where app. 

user group

.

ð

After successful login the following message appears: 

‘Successfully mapped to

network name’

.

The connected network drive is then available on the smartPanel with the

local_name

 via 

My Device

 at 

Network

.

Local_Name: 

data

, network drive: 

testserver\archive

, Username:

guest

Input: 

\> net use data \\testserver\archiv /user:guest

The connected network drive is then available via \network\data at the smartPanel.

Overview

List released resources

Connect net drive

Example:

VIPA HMI

Deployment

Access to the network resources 

HB160 | TP-smart | H71-71A41-0 | en | 20-20

 

34

Summary of Contents for TP 307-SM
















































Reviews: