YASKAWA SLIO, Manual

Page: 104 / 116

Module Profile List
Index:Sub Name Type Offset Access Default Description
0xF010:00 Module Profile List U8 0 ro 0x40 (64) Module ID of the modules
n Bit 15...0: Module profile information of the
module
n
Bit 31…16: fix (0) Module profile specific
information
0xF010:01 Subindex 001 U32 16 ro 0
0xF010:02 Subindex 002 U32 48 ro 0
0xF010: ... ... U32 ... ro
0xF010:40 Subindex 064 U32 ro 0
Ä ‘Explanation of the elements’ page 82
Configured Module Ident List
Index:Sub Name Type Offset Access Default Description
0xF030:00 Configured
Module Ident List
U8 0 rw 0x40 (64) Module ID of the configured modules
0xF030:01 Subindex 001 U32 16 rw 0
0xF030:02 Subindex 002 U32 48 rw 0
0xF030: ... ... U32 ... rw
0xF030:40 Subindex 064 U32 rw 0
Ä ‘Explanation of the elements’ page 82
Write access to the object 0xF030 is only possible with CompleteAccess.
Single access is not allowed!
n When writing to a subindex the entered value is compared with the module ID of the
same subindex of index 0xF050. So the configuration may be checked.
n Some configuration tools cannot automatically be write to this index, thus some confi-
guration errors may not be detected.
Detected address list
Index:Sub Name Type Offset Access Default Description
0xF040:00 Detected address
list
U8 0 ro 0x40 (64) Addresses of the modules, which were recog-
nized by the coupler.
0xF040:01 Subindex 001 U16 16 ro
0xF040:02 Subindex 002 U16 32 ro
0xF040: ... ... U16 ro
0xF040:40 Subindex 064 U16 ro
Ä ‘Explanation of the elements’ page 82
System SLIO
Deployment
Object Dictionary
HB300 | IM | 053-1EC01 | en | 22-30 104