2 Installation
2.2 Lifting Instructions
2-2
163475-1CD
163475-1CD
MHTH Postioner
SIGMA V
2.2
Lifting Instructions
The MHTH Headstock is shipped on a wooden shipping skid. The
customer is responsible for removing the positioner from the shipping skid
and inspecting for shipping damage.
The MHTH Headstock can be
moved by forklift, or by overhead crane and straps using M16
eyebolts.
To install the MHTH Headstock, proceed as follows:
1. Carefully remove protective plastic wrapping from drive assembly.
2. Inspect drive assembly for shipping damage.
3. Unbolt the positioner from the shipping skid using a ¾-inch socket.
4. Attach slings from lifting device to the four M16 lifting eyes
(see
Fig. 2-3: Shipping
5. Using the lifting device, lift the drive assembly or headstock and place
in desired location.
WARNING
Forklift truck operation should be performed only by licensed
personnel. Never place any part of your body under a suspended load
or move a suspended load over any part of another person’s body.
Careless handling may result in severe personal injury or death.
NOTE
If any equipment is damaged, notify the shipper
immediately.
TO LIFTING DEVICE
TO LIFTING DEVICE
17/28
