YASKAWA ELECTRIC
TOBP C730600 24D 1000-Series Option SI-S3/V, SI-S3/T Installation Manual
11
3 Receiving
3
Receiving
Please perform the following tasks after receiving the CANopen Option:
• Inspect the CANopen Option for damage.
If the CANopen Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate (see
).
• If you have received the wrong model or the CANopen Option does not function properly,
contact your supplier.
◆
Contents and Packaging
Table 2 Contents of Package
◆
Tool Requirements
Note:
Tools required to prepare CANopen cables for wiring are not listed in this manual.
Description:
Option Unit
Ground Wires
Warning Labels
Installation Manual
−
Quantity:
1
4
1
1
A Phillips screwdriver (M3, M3.5 to M6
) metric or (#1, #2
) U.S. standard size is
required to install the CANopen Option.
<1>
Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
MANUAL
