YASKAWA SI-EL3, Technical Manual

Page: 6 / 42

6
YASKAWA EUROPE GMBH YEU SIEP C710616 86A - AC Drive A1000 Option Powerlink - Technical Manual
2 Product Overview
2 Product Overview
 About This Product
The Powerlink Option (Model: SI-EL3) is an option card designed to connect the YASKAWA AC drive to a Powerlink network. Using this option
card a Powerlink master can:
• operate the drive
• monitor the drive operation status
• read or modify drive parameters.
The SI-EL3 option provides instant connectivity to a Powerlink network for the YASKAWA A1000 drive. The option contains support for the
Velocity mode according the CANopen Device Profile and Motion Control (DSP402) profile. It also contains YASKAWA vendor specific
CANopen objects based on the present CANopen option board specification.
The Powerlink Option supports the following communication profiles:
• DS 301 Ver. 4.02
• DSP 402 Ver. 3.0 Velocity Mode

Applicable Models
The option can be used with the drive models in Table 1 .
Table 1 Applicable Models
Drive Series Drive Model Number Software Version
<1>
<1> See “PRG” on the drive nameplate for the software version number.
A1000
CIMR-A  2A 
VSA901018 to VSA901099
CIMR-A  4A 