5 Installation Procedure
YASKAWA Europe
YEU TOEP C710606 87A - V1000 Option Powerlink - Installation Manual
EN 17
Note: Cover removal steps for certain larger models of V1000 with a Terminal
Cover:
-Single-Phase 200 V Class: CIMR-V
BA0006 to BA0018
-Three-Phase 200 V Class: CIMR-V
2A0008 to 2A0069
-Three-Phase 400 V Class: All models
Remove the terminal cover before removing the bottom cover to install the
Powerlink Option. Replace the terminal cover after wiring the Powerlink Option.
4. Reattach the bottom cover.
5. Connect the Powerlink Option to the drive. Properly secure the tabs on the left and right
sides of the Powerlink Option to the drive case.
Figure E.4
Attach Powerlink Option
200/7.9
BA0006
BA0010
BA0012
BA0018
2A0010
2A0012
2A0020
4A0001
4A0002
4A0004
4A0005
4A0007
4A0009
4A0011
250/9.8
-
2A0030
2A0040
4A0018
4A0023
400/15.7
-
2A0056
2A0069
4A0031
4A0038
Ground Wire Length
(mm/in)
Drive Model
CIMR-V
Single-Phase
200 V Class
Three-Phase
200 V Class
Three-Phase
400 V Class
Tabs should line up
Tabs should line up