6 INSPECTION AND MAINTENANCE
E - 14
5.2
Precautions at Operation
CAUTION
D
During operation, do not touch the SERVOPACK’s heatsink.
Failure to observe this caution may result in burns.
6
INSPECTION AND MAINTENANCE
This section describes the basic inspections and maintenance. If any failure occures on SERVO-
PACK, refer to
Σ
-II Series SGM
V
H/SGDH User’s Manual Design and Maintenace Section 10.2
Troubleshooting (SIE-S800-32.2) and
Σ
-II Series SGDH fully closed I/F User’s Manual (SIE-
C718-5). Contact your Yaskawa representative if the problem cannot be solved by the procedures
described.
WARNING
D
Be sure to turn OFF power before inspection or maintenance.
Otherwise, electric shock may result.
D
Never open the terminal cover while power is ON, and never turn ON power when the terminal
cover is open.
Otherwise, electric shock may result.
D
After turning OFF power, wait at least five minutes before servicing the product.
Otherwise, residual electric charges may result in electric shock.
CAUTION
D
Never change wiring while power is ON.
Failure to observe this caution may result in electric shock or personal injury.
