![background image](http://html2.mh-extra.com/html/yaskawa/s-7-series/s-7-series_manual_3353437059.webp)
8 Crimp Terminals and Insulating Sleeves
E-57
8
Crimp Terminals and Insulating Sleeves
If you use crimp terminals for wiring, use insulating sleeves. Do not allow the
crimp terminals to come close to adjacent terminals or the case.
To comply with UL standards, you must use UL-compliant closed-loop crimp
terminals and insulating sleeves for the main circuit terminals. Use the tool rec-
ommended by the crimp terminal manufacturer to attach the crimp terminals.
The following tables give the recommended tightening torques, closed-loop
crimp terminals, and insulating sleeves in sets. Use the set that is suitable for
your model and wire size.
If you use a SERVOPACK that supports a Dynamic Brake Option and connect
an External Dynamic Brake Resistor, refer to the following section.
Dynamic Brake Resistor Terminals:
-7S SERVOPACKs for Use with Three-Phase, 200-
VAC or DC Power Supplies
SERVOPACK
Model:
SGD7S-
Main
Circuit
Termi-
nals
Screw
Size
Tighten-
ing
Torque
[N
m]
Crimp
Terminal
Horizon-
tal Width
Recom-
mended
Wire Size
Crimp
Terminal
Model
Crimp-
ing Tool
Die
Insulat-
ing Sleeve
Model
From J.S.T. Mfg. Co., Ltd.
From
Tokyo
Dip Co.,
Ltd.
R70A, R90A,
1R6A, 2R8A,
3R8A, 5R5A,
7R6A, and
120A
Connec-
tor
M4
1.2 to
1.4
10 mm
max.
AWG14
(2.0 mm
2
) R2-4
YHT-
2210
180A and
200A
Termi-
nal
block
M4
1.0 to
1.2
7.7 mm
max.
AWG10
(5.5 mm
2
) 5.5-S4
YHT-
2210
TP-005
AWG14
(2.0 mm
2
)
2-M4
TP-003
AWG16
(1.25 mm
2
)
M4
1.2 to
1.4
10 mm
max.
AWG14
(2.0 mm
2
) R2-4
YHT-
2210
Continued on next page.