12
Applicable wire specifications for terminal blocks TA1 and TA2 are shown in
Table 2
.
Terminal: MKDS1 series manufactured by Phoenix Contact GmbH & Co.
Strip back insulation for a distance of 0.22 inches (5.5 mm) on wire leads connected to the
PG-B2 card.
Fig. 6 Connecting Wire End for Terminal Blocks TA1 and TA2 Side
Notes on selecting cables
• The thicker a cable is, the greater the pressure on the option card and the greater the possibility of
a failure occurring will be.
• The thinner a cable is, the poorer the electrical contact and the greater the possibility of the con-
ductor breaking will be.
• The longer the cable is, the more likely a voltage drop in the PG power supply or PG signal will
occur.
Table 2 Wire Specifications
(mm
2
)
AWG
I (amps)
VAC
Thin Twisted Wire
1
16
12
125
Solid Wire
1.5
16
12
125
UL
−
22-16
10
300
CSA
−
28-16
10
300
CSA
−
28-16
10
150
0.22 in. (5.5mm)
NOTE
