MOTO
MAN
4-1
Arc-WorldLite 50 System Manual
SECTION 4
INSTALLATION
The Arc-WorldLite 50 system can be installed easily in just a short time by one or
two workers. Follow established safety procedures at all times throughout the
installation process. Failure to use safe work practices can result in damage to the
equipment and injury to the workers.
CAUTION!
Installation of the Arc-WorldLite 50 is not a task for the novice. The
Arc-WorldLite 50 system is not fragile, but it is a highly
sophisticated robotic system. Handle components with care. Rough
handling can damage system electronic components.
4.1
Materials Required
All system hardware necessary for installing the Arc-WorldLite 50 is included
with the system. This section identifies customer-supplied items and tools required
to complete installation.
4.1.1
Customer-Supplied Items
•
Gas bottles for the welding torches
•
Incoming power supply
•
Two earth ground cables with two earth ground stakes
•
Weld wire
•
Incoming air supply: 0.04 cmm at 620.5 kPa (1.5 scfm at 90 psi)
4.1.2
List of Tools Required
•
Safety glasses
•
Face shields
•
Gloves
•
Level
•
Rachet with 3/4-in. socket
•
Adjustable wrench set
•
Hammer drill with appropriate
concrete bits
•
Phillips and flat screwdrivers
•
Hammer
•
Socket set
•
Forklift and/or overhead crane
•
Air-impact gun with 3/4-in.
socket
•
Open-end wrench set
•
Two socket-head (Allen)
•
Wrench sets (standard and metric)
