9
Cable Wiring
9.1
Disassembly and Reassembly of Internal Wiring Harness
9-7
HW1485471
HW1485471
4. S-Head
• Refer to
table 9-4 “Internal Wiring Harness Parts Checklist (S-
fig. 9-4 “Disassembly and Reassembly of the Internal
1. Cut off cable ties
.
2. Unscrew the hexagon socket head cap screws
and remove the
plate .
3. Unscrew the cross head APS bolts
and remove the cover
.
4. Cut off cable ties
.
5. Remove the “IN” and “OUT” connectors of the internal wiring harness
from the “IN” and “OUT” ports of the multi-port connector in the S-
head.
6. Cut off the cable ties
.
7. Turn the connector on the cable side of the power connector for the S-
and L-axis motor, and then disconnect the power cable. If the
connector does not turn, remove the connector by holding the
connector on the cable side with a pair of plastic pliers, etc.
Table 9-4: Internal Wiring Harness Parts Checklist (S-Head)
No.
Item
Qty.
Note
Plate HW0403915-1
1
Hexagon socket head cap screw M5
(length: 12 mm) *trivalent chromate*
Conical spring washer 2H-5 *trivalent
chromate*
2
each
Tightening torque 6 N•m
Cover HW1408867-1
1
Cross head APS bolt M4 (length: 8
mm) *trivalent chromate*
2
Cable tie T50R-HSW
3
Cable tie T120R-HSW
5
Cable tie T50R-HSW
2
6
2
1
4
3
5
7
1
2
3
4
5
6
7
96/134
