2) Change to the folder in which the RCS server program was installed.
Change the current folder to the folder where the RCS server program
(rcssrv_Yaskawa_NX100__1.xx.exe) is located. The following example is for the DOS
command input and assumes that RCS serve program has been installed in
C:\YASKAWA RRS:
>c:
>cd c:\YASKAWA RRS\yaskawa_nx100__1.xx\bin
3) Start the server program.
Start the RCS server program (rcssrv_Yaskawa_NX100__1.XX.exe). The argument
"-tcp" and the port no. "4500" are required for the program. The following example is for
the DOS command input and assumes that RCS serve program has been installed in
C:\YASKAWA RRS:
>rcssrv_Yaskawa_NX100__1.XX.exe -tcp 4500
Fig. 3-8 Example of the RRS server program start-up
Note) If the RCS server has been started in the past, the files "Rcssrv_YASKAWA_
NX100__1.XX.log" and "Rcssrv_YASKAWA_NX100__1.XX.pid" are created
under the “c:\tmp" folder. Delete those files before starting the RCS server program
(rcssrv_Yaskawa_NX100__1.XX.exe); if those files exist, the server program
would not start properly.
25/31
HW0482335
