2.
Push the screwdriver backwards:
ð
The connector is unlocked and can be removed.
CAUTION!
Via wrong operation such as pressing the screwdriver down-
ward, the release lever may be damaged.
3.
In this way, remove all plugged connectors on the power supply.
The replacement of the power supply on the mounting rail happens with the following pro-
ceeding:
1.
Use a screwdriver to pull the locking levers of the power supply outwards until these
engage audible.
2.
Remove the power supply with a rotation upwards from the mounting rail.
3.
Pull the locking levers of the new power supply outwards until these engage
audible. Plug the power supply from the top onto the mounting rail and turn the
power supply downward until it rests on the mounting rail.
CAUTION!
It is not allowed to mount the module sideways on the mounting rail,
as otherwise the module may be damaged!
Power supply replacement
Replacement on mounting
rail
VIPA System MICRO
Basics and mounting
Demounting
HB400 | PS | M07-2BA00 | en | 20-02
17
